This DIY project is perfect for those of you who are looking for a creative way to give out wedding/political party favor bags or just thinking about a thoughtful way to give a gift. This entire project takes about 15-20 mins to brand and it doesn't cost much to whip up a couple of these baggies. Using muslin fabric is really easy to work with and information technology gives you lot a clean canvass to really let your artistic juices period. When information technology comes to the pattern you tin can utilise dissimilar patterns, shapes, or even personalize it with messages.

Burlap Favor Bags for Wedding or Party

DIY Painted Favor Bags Materials

Materials You Will Need To Craft The Favor Bags:

  • Pair of scissors
  • String or Twine
  • Muslin fabric
  • Arts and crafts foam
  • Glue gun
  • Wood crafting blocks
  • Sewing machine
  • Straight pins
  • Iron
  • Acrylic paint

DIY Painted Favor Bags - Muslin Fabric

Footstep 1: prepare the burlap muslin fabric

Take the muslin fabric and measure out 7 inches beyond (starting from the folded area) and ix inches tall. One time y'all have measured and cut the material, brand sure the inside of the fabric is facing you.The unabridged fabric should measure out xiv inches wide.

DIY Painted Favor Bags - Measure

Step 2: iron the folded material

Measure and marking i inch all across the meridian of the cloth. Fold the superlative edge of the fabric to the mark and iron the folded material downwardly. Now stitch all forth the line.

DIY Painted Favor Bags - Fold over the Fabric

Footstep 3: sewing process

Fold over the cloth correct sides facing each other. Now sew the open sides of the fabric( left bottom & bottom). Make sure not to sew the folded side of the bag.

DIY Painted Favor Bags - After Sewing

Step iv: cut 2 tiny slits

After sewing the sides turn the handbag inside out. Grab your scissors and cutting ii tiny slits, one on contrary sides of the stitched line. Brand sure your merely cutting the starting time layer of fabric.

DIY Painted Favor Bags - String

Stride 5: add cord

Cutting ten inches of the twine/string and take the safety pivot and attach it to the end of the twine. Take the safety pin and put it through the hole and pull through to the other side. Once the yous got the twine through, remove the safety pivot and tie a knot towards the terminate.

DIY Painted Favor Bags - Foam

Step vi: fix the stamp

Have the canvass of arts and crafts foam and cut out a 1 ½ inch circumvolve and cut half a circumvolve. Grab your glue gun and glue the cut-outs to the wooden craft blocks

DIY Painted Favor Bags - Design

Step seven: stamping process

Before you blueprint the pouch, place a slice of paper within to protect the other side of the material. Have your paint and pour it onto a plastic plate and carefully dip you circle postage on the paint. Test it out on a piece of paper before you postage it on the pouch. Of course you don't have to stick with this exact design.

DIY Painted Favor Bags - Modern Design

Decision

In one case all the paint is all stale, your bag is all set to requite out. Go ahead and stuff your creation with goodies and gifts. Hope this tutorial was fun and easy to follow.

Happy crafting!